Electric clippers are handy home equipment as well as an essential part of a salon business as they can be used as a quick and effective alternative to shaving sticks and razors. Millions of people use clippers daily to cut and shave their hair, and whether your clipper is for personal or professional use, keeping it clean and sterilized at all times is important. Cleaning and maintaining your clippers regularly will enable them cut hair effectively for a long time, as well as, guard yourself, family or clients against infections.
Fortunately, maintaining clippers is a pretty straightforward task. This tutorial will show you how to clean clippers effectively for a quicker, safer haircut. The process might seem rigorous to first-timers, but should be easy after some practice.
How Often Should I Clean My Clippers?
How regularly you disassemble your clipper and give it a thorough cleaning depends on how often you use it and how it is used. Clippers used professionally at a salon should be brushed and sterilized after every cut, and should be properly disassembled and cleaned after every 4-5 cuts. It is advised you clean and sterilize them after every cut if you can, but just sterilization is enough to disinfect the blades and you can clean after a few cuts to remove hair and sharpen the blades.
Home used clippers, on the other hand, should be cleaned after every use. They are not used as frequently as salon clippers, so should be cleaned and kept safely after every barbing session, as leaving them untidy for extended periods could damage the blades and the clipper in general.
How to Clean Clippers and maintain them?
Generally, clippers come in different brands, models, and sizes as: cordless hair clippers, best balding clippers, professional hair clippers… But the below steps should apply to cleaning all kinds of electrical clippers as they are all mostly made with the same structure. Make sure the clipper is turned off before you begin work and do not use water to clean the blades of the clipper under any circumstance.
The main point of cleaning clippers is to remove the leftover hair and polish it to make it look and work as good as new. Blades clogged by leftover hair will get duller over time and haircuts will become painful and prolonged and may cause bumps and skin irritation. In other words, you’ll be doing yourself or your customers a huge favor by cleaning them often.
Read the below guide to learn how to clean your clippers swiftly and effectively.
You will need
- Cotton wool
- Blade oil
- Tooth brush
- 20 cl of alcohol solution
STEP 1: GATHER YOUR TOOLS
You should have a tool box or small bag containing all the necessary equipment you will need in cleaning your clipper regularly.
Make sure you have all the necessary tools present before you begin cleaning your clipper. Double check on what kind of screws your clipper uses, but a flathead or Philips screwdriver will be required most times. An old toothbrush, some cotton wool and blade sterilizer will also be required during the process.
STEP 2: UNPLUG THE MACHINE AND DUST-OFF HAIR
Clippers should never be on while cleaning or sterilizing due to the use of liquid-based sterilizers and alcohol which could damage the electrical parts of your clipper.
Unplug the clipper at least 30 minutes before you start cleaning to enable it cool down. Once the clipper is cool, use a dry rag to dust off leftover hair from the blades and body of the clipper.
STEP 3: REMOVE THE UPPER PLATE OF THE CLIPPER AND DETACH THE BLADES
Most clipper brands use 4 screws to hold the blades and panel in place. All screws are likely to be similar, so confirm the type of screwdriver required to open the panel and loosen the blades.
Once you have the adequate screwdriver, gently utilize it to remove the screws holding the upper panel and blades in place. Once its been removed, ensure the panel and all screws are stashed away safely to avoid misplacement. Some brands might require both the upper and lower panel to be removed, but the process is largely the same and requires only a few minutes to complete.
STEP 4: CLEAN THE INSIDES OF THE CLIPPER AND STERILIZE THE BLADE
Depending on the brand or model of your clipper, cleaning the insides of your machine can be difficult sometimes. You can use a tooth brush to clean off dirt and hair if a rag is too dense for the sensitive parts of your clipper.
Use a rag or toothbrush to gently clean off dirt and hair accumulated inside your clipper. Do not apply water while cleaning as water might cause rust and could damage your clipper. While you are dusting off the insides of the clipper, dip your blades into a small bowl of alcohol, or any other effective sterilizer to disinfect it. Leave the blade to sit in the alcohol solution or sterilizer for 10-12 minutes, remove it and leave to dry naturally. Once you have successfully cleaned the inner parts of the clipper, use a small piece of cotton wool soaked in alcohol or sterilizer to clean the insides thoroughly and leave to dry as well.
STEP 4: REASSEMBLE THE CLIPPER
Ensure all parts of the clipper are clean and dry before reassembling as a damp clipper might get damaged if plugged in.
Make sure the blades are realigned before you insert the screws and tighten them. Ensure both screws for the blades are tight and firm to avoid slipping during haircut. Next, attach the upper panel together, make sure it’s aligned, then tighten the screws
STEP 5: FINISH UP!
Once your clipper is reassembled, plug it into power; if step 4 isn’t done properly, the clipper will sound louder than normal and the blades might not function properly, at which point you should loosen the panel and blades and reassemble them again till they are well fitted.
When the machine sounds normally and the parts are properly aligned, its time to finish up with some oiling. Turn off the clipper and apply a small amount of clipper oil to the front and sides of the blade while facing the clipper down, but ensure you don’t over oil the blades. Once it is oiled, turn the machine on again for 5-7 minutes to enable the oil spread across the blade. Be sure to use the clipper oil that comes with the clipper or any other recommended clipper oil as some lubricants may be harmful to the blades.
If all 5 steps are done correctly, your clipper should be looking as good as new, with a shiny look and an extended life span.
Giving you clipper a full cleaning session might seem stressful and tedious for starters, but should be a breeze after a little practice. Cleaning out your clippers not only extends its life span but eliminates the chances of infection due to untidy or infected blades, so be sure to clean your clippers as frequently as possible and store them in a dry and clean place when not in use.